B-1000f

Luxman B-1000f Power Amplifier

Fifteen years in development; The Luxman Board approved completion of the Luxman B-1000 in 2003 two years before Luxman's 80'th Anniversay in 2005.

The Luxman B-1000f flagship monoblocks are a showcase of what Luxman have achieved over the past eighty years. Equipped with ODNF version 2.3; less noise, more music. Truly state of the art in High End Audio.

Why settle for less than the best !

In order to bring out the full potential of the loudspeakers, an amplifier must be able to cope with drastically fluctuating speaker impedance conditions. This can only be achieved by ensuring constant drive voltage at all times. In other words, the output impedance of the amplifier must be kept very low.

This also makes it possible to absorb the counter-electromotive force generated by the voice coil, thereby eliminating a major source of intermodulation distortion. With an amplifier that is stable into a 1 ohm load; no matter what impedance the speker drops to, nor need to worry about your speaker's phase shift - these amplifers are unflappable.

With continuous output power of 2,000 watts into 1Ω - will easily drive the most difficult speaker loads.

Luxman only began exporting these amplifers for the first time outside of Japan during Q3 2007.

Manufacturers website here

Review 1     Luxman B-1000f PDF Download here

 

B-1000f Enlarge Image

top

Luxman B-1000f Power Amplifier

Specifications:

Rated Output: 250W /8Ω, 500W /4Ω, 1,000W / 2Ω, 2,000W /1Ω

Input Sensitivity/ Impedance: 1V / 51KΩ RCA, 67KΩ XLR

Output Impedance: 1V / 210Ω, maximum 4.5V RCA

Harmonic Distortion: 0.0007% (1KHz) Balanced

Frequency Response: DC – 150KHz (+0, -3 dB)

Nominal Voltage Gain: 32 dB @ 8Ω

Signal-to-Noise Ratio: 118dB (1KHz {IHF-A}) XLR

Power Consumption: 439W (rated power) 232W (idle), 0.7W (stand-by)

Dimensions: 16.9 (W) x 11.6 (H) x 23.3” (D)

Weight: 141 lbs. 240 lbs (shipping) each
 

bottom
power banner