Atacama Audition Speaker Stands

Home > Accessories > Speaker Stands > Atacama
Stock code: ACMAAUDITIONSPK


    For more information on any of our products please call us:


    01333 425999

    Model
    Finish

    Our Price: £299.99
    • Product Info
    • Stock Enquiry
    • Part Exchange
    • Reviews (0)

    Product Information

    The Audition Series Speaker stands have a large 360mm by 225mm laser cut top plate and can be used with either dimension being front facing. This allows both large, wide but shallow speakers to be supported as well as the more numerous deep cabinet types.

    The Audition Series are supplied in a Satin Black paint finish with Silver Metallic or Diamond White as a cost option.

    Each pair of Audition stands are equipped with new 5mm thick laser cut carbon steel base plates, eight heavy duty BZP 8mm adjustable floor spikes featuring stainless steel detailed top caps and upgraded High Load Trapezoidal (HLT) Isolation Gel Pads for the top plates.

    Atacama recommend that each pair are mass loaded with Atabites in order to maximize their sonic potential (see below for quantity guidance and recommendations on the amount of mass filler to use).

    Floor spikes and HLT Isolation Gel pads are included with each pair of stands, with the option of adding Atabite mass loading filler, top spikes and spike shoes if required.

    As these speaker stands use isolation spikes, two sets of four Atacama HD-L (Nickel finish) spike shoes are recommended to protect delicate floor coverings.

    Single stands can be supplied if required; please contact your local Atacama stockist or the Atacama sales department on 01455 283251 for pricing and availability (UK only).

    Audition speaker stands are designed and manufactured in the UK.

    These are a specialist speaker stand, so are made to order. Allow 2-3 week manufacturing times.

    Audition Series Specifications

    OVERALL HEIGHT

    MODEL HEIGHT ATABITE QTY.
    Audition 300 335mm | 13.19” 2 Tubs
    Audition 400 435mm | 17.12” 3 Tubs
    Audition 500 535mm | 21.06” 4 Tubs
    Audition 600 635mm | 25” 5 Tubs
    Audition 700 735mm | 28.9" 6 Tubs

    TOP PLATE DIMENSIONS

    Setup 1. Width 360mm (14.17”), Depth 225mm (8.9”)
    Setup 2. Width 225mm (8.9”), Depth 360mm (14.17”)

    BASE PLATE DIMENSIONS

    Setup 1. Width 400mm (15.7”), Depth 305mm (12”)
    Setup 2. Width 305mm (12”), Depth 400mm (15.7”)

    Weight capacity 20kg per stand.

    Note- Supported speaker width/depth dimensions should not exceed speaker stand base plate dimensions.

    Atabite Quantity Recommendation

    Below are stated the recommended number of tubes to share between each pair of speaker stands. All vertical poles should be equally filled. Amounts are approximate and will not necessarily completely fill the tubes. It is suggested that you experiment with the exact amount to achieve the best sonic results for your particular system setup as the speakers, room acoustics, cable loom, positioning of the speakers and hifi components will determine how much Atabite filler to use to get the best sound from your speakers.

    As a general rule, approximately half to two thirds full gives the best results. If you find the speakers are lacking high end detail and sounding dull at the lower end that usually means you have overfilled the stands and will need to reduce the volume of Atabites in each stand.

    If the speakers are new, it is suggested that the exact amount of Atabites needed will best be determined once they are run in. Refer to your speaker instructions or contact the supplying retailer/ manufacturer for guidelines on running in recommendations.

    Manufacturer Site

    Stock Enquiry

    Occasionally, due to stock demand, we can sell out. If this occurs when you make a purchase, we will inform you quickly. Most out of stock items are available for dispatch within 3 working days. If your purchase is urgent, use this form for a priority price and stock availability check.

    All pre-owned items are in stock and available for next day delivery if order placed before 1pm.

    Enquiries will be responded to within 1 hour during office hours.

     

    EMAIL US

    Call us

    • 01333 425999

    Part Exchange

    If you would like a quote please fill in the form below with as much detail as possible and we'll get back to you with a price.

    Customer Reviews

    Write an online review and share your thoughts with other shoppers!

    Be the first to review this product

    Related Products
    Customer Reviews