ATC P2 – Dual-Mono Power Amplifier | Audio Emotion | Preowned

View more images

Product Description

Amazing Condition
Includes Factory Box and Packing
Includes Manual
Includes Remote
Includes Mains Cable
Includes ATC Key

Upgrading from the P1 power amp, the P2 adds a much larger power supply and additional output MOSFETs to double power to 300W per channel. It is the ideal solution to drive speakers in larger rooms and/or when a loudspeaker presents a difficult load and will provide an effortless, musical presentation under these demanding conditions. Like the smaller P1, the combination of exceptional resolution and neutral fidelity allows the quality of the original recording to shine through whilst also offering outstanding compatibility with a wide range of partnering equipment.

Features

300W per channel – ideal for larger rooms and/or challenging loudspeaker loads.
Dual-mono design delivers full power simultaneously from both channels, with minimal crosstalk.
Balanced and un-balanced inputs, plus un-balanced ‘link’ outputs.
Grounded source class A/B output stage circuits as found in ATC’s renowned active loudspeakers.
Wide bandwidth, low distortion and high dynamic range ensure tonal accuracy and perfectly timed transients.
Gain matched to smaller 150W P1 enabling bi-amp compatibility.
Neutral fidelity ensures excellent system compatibility.
Hand built in the UK.

“In terms of detail, the P2 struck gold once again. Instruments were lifelike and beautifully atmospheric, no matter whether a recording featured a soft solo acoustic ensemble or a grand orchestral bombardment.”
Adam Smith, Hi-Fi News, March 2017.

Specifications

Max Continuous Output Power: >300W (1% THD, 8 ohms, both channels driven)
Input Sensitivity: 2V (ref. 150W out)
Frequency Response: <2Hz – >400kHz (-3dB)
S+N/N Ratio: >115dB (ref 150W, IEC ‘A’)
Crosstalk : >100dB (10Hz – 20kHz)
THD: <0.002% / -95dB (8 ohms, 1kHz, 1dB below full power)
Analogue Line Inputs: 1 x stereo pair female XLR (balanced), 1 x stereo pair RCA/Phono (unbalanced)
Output ‘Link’: 1 x stereo pair RCA/Phono (unbalanced)
Dimensions: 142 x 453 x 338mm / 5.6 x 17.8 x 13.3 inches (H x W x D inc. terminals)
Weight: 23.35kg / 51.37lbs

Specifications

Product Type

Power Amplifier

Brand

ATC

Condition

Used

Product Code

ATC-P2-P22

Description

Amazing Condition
Includes Factory Box and Packing
Includes Manual
Includes Remote
Includes Mains Cable
Includes ATC Key

Upgrading from the P1 power amp, the P2 adds a much larger power supply and additional output MOSFETs to double power to 300W per channel. It is the ideal solution to drive speakers in larger rooms and/or when a loudspeaker presents a difficult load and will provide an effortless, musical presentation under these demanding conditions. Like the smaller P1, the combination of exceptional resolution and neutral fidelity allows the quality of the original recording to shine through whilst also offering outstanding compatibility with a wide range of partnering equipment.

Features

300W per channel – ideal for larger rooms and/or challenging loudspeaker loads.
Dual-mono design delivers full power simultaneously from both channels, with minimal crosstalk.
Balanced and un-balanced inputs, plus un-balanced ‘link’ outputs.
Grounded source class A/B output stage circuits as found in ATC’s renowned active loudspeakers.
Wide bandwidth, low distortion and high dynamic range ensure tonal accuracy and perfectly timed transients.
Gain matched to smaller 150W P1 enabling bi-amp compatibility.
Neutral fidelity ensures excellent system compatibility.
Hand built in the UK.

“In terms of detail, the P2 struck gold once again. Instruments were lifelike and beautifully atmospheric, no matter whether a recording featured a soft solo acoustic ensemble or a grand orchestral bombardment.”
Adam Smith, Hi-Fi News, March 2017.

Specifications

Max Continuous Output Power: >300W (1% THD, 8 ohms, both channels driven)
Input Sensitivity: 2V (ref. 150W out)
Frequency Response: <2Hz – >400kHz (-3dB)
S+N/N Ratio: >115dB (ref 150W, IEC ‘A’)
Crosstalk : >100dB (10Hz – 20kHz)
THD: <0.002% / -95dB (8 ohms, 1kHz, 1dB below full power)
Analogue Line Inputs: 1 x stereo pair female XLR (balanced), 1 x stereo pair RCA/Phono (unbalanced)
Output ‘Link’: 1 x stereo pair RCA/Phono (unbalanced)
Dimensions: 142 x 453 x 338mm / 5.6 x 17.8 x 13.3 inches (H x W x D inc. terminals)
Weight: 23.35kg / 51.37lbs

Reviews

No reviews left yet

Write A Review

Delivery Information

Delivery is free for all orders over £250.

'In Stock' items ordered before 1pm will be dispatched the same day.

We use DPD Local 'Next Day Service' for most UK deliveries. Orders sent via 'DPD Local - Next Day Service' will be fully tracked with a 1-hour delivery timeslot on the day of delivery. Standard delivery is Monday to Friday.

Saturday delivery can be selected at checkout for £19.95.

Small items and LP's may be sent using Royal Mail.

Large/heavy items may be sent using TNT Express.

For all other countries please visit the 'Delivery Information' link in the footer.

Occasionally, due to stock demand, we can sell out. If this occurs when you make a purchase, we will inform you quickly. Most out of stock items are available for dispatch within 3 working days. If your purchase is urgent, please contact us to check availability.

Customer Reviews

ATC P2 – Dual-Mono Power Amplifier

Item in Stock

Product Code ATC-P2-P22

Price Promise: If you find an identical item cheaper from one of our online competitors, tell us and not only will we match the price, we'll beat it by 10% of the difference! Terms and conditions apply, see more information about our price promise.

Only left in Stock