Home / Analogue / Phono Stages
product review overlay image
Clearaudio Nano Phono V2 | Phono Stage | Audio Emotion

Product Description

The Nano Phonostage isn’t ruffled by anything. External interferences are no longer an issue with this fine piece of engineering. Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward of these efforts is a signal to noise ratio of up to 84 decibels. The input impedance is set using plug-in links, so there is no loss of quality when using different moving magnet and moving coil cartridges. The Nano Phono Headphone additionally contains a powerful headphone amplifier within the solid aluminium housing for private listening at the highest fidelity.

The printed circuit board on the Clearaudio Nano Headphone Phonostage is embedded within a solid CNC-machined aluminium block, which forms a resonance-free chassis. The latest sophisticated surface-mount technology is used in conjunction with precision electronic components, such as Burr-Brown (Texas Instruments) integrated circuits, and extremely short signal paths leading the Clearaudio Nano Headphone Phonostage to produce pure, hum and noise-free music reproduction. The fully dual-mono design features separate left and right switches for input loading, gain control and choice of MM or MC sensitivity, allowing the Clearaudio Nano Headphone Phonostage to extract the best results from virtually any cartridge.

FEATURES

  • Low signal to noise ratio of up to 84 decibels
  • The input imedance is set using plug-in links, so there is no loss of quality when you difference MM/MC cartridges
  • Surface-mount technology is used leading to produce pure, hum and noise-free music reproduction

Specifications

MODE: MM / MC switchable by jumpers (at bottom) 
Subsonic filter switchable by jumpers (at bottom)
AMPLIFICATION: 34dB (MM mode)
54dB (MC mode)
INPUT LOAD: 47 kΩ/ 220pF / MM mode
User MC mode
RIAA ACCURACY: ± 0.4dB @ 20Hz - 50kHz
THD: < 0.04%
SIGNAL TO NOISE RATIO: 81dB (A) (MM mode)
70dB (A) (MC mode)
HEADROOM: 18dB / MC
MAX. OUTPUT VOLTAGE: 10V eff (1 kHz)
RIAA: Nach RIAA (Zeitkonst.: 75µs / 318µs / 3180µs)
CHANNEL SEPERATION: > 80dB @ 1kHz
OUTPUT IMPEDANCE: 75Ω
INPUTS: unbalanced (RCA)
OUTPUTS: unbalanced (RCA)
optional headphone output (Jack: 3.5mm)
POWER CONSUMPTION: Max. consumption: 2.3 Watt
In operation: 2.3 Watt
Standby mode: < 0.3 Watt
Off mode: 0.0 Watt
POWER SUPPLY: ±18V DC / 300mA
(external power supply)
TOTAL WEIGHT: Approx. 500g (Preamp and power supply)
DIMENSIONS (W/D/H): Approx. 3.35 × 4.17 × 0.98 inches
DIMENSIONS (W/D/H): Approx. 85 × 106 × 25mm

Read More

Specifications

Product Type
Phonostage
Brand
Clearaudio
Condition
New
Product Code
CLEARAUDIO-NANOV2-B

Customer reviews

No reviews left yet
Write A Review

The Nano Phonostage isn’t ruffled by anything. External interferences are no longer an issue with this fine piece of engineering. Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward of these efforts is a signal to noise ratio of up to 84 decibels. The input impedance is set using plug-in links, so there is no loss of quality when using different moving magnet and moving coil cartridges. The Nano Phono Headphone additionally contains a powerful headphone amplifier within the solid aluminium housing for private listening at the highest fidelity.

The printed circuit board on the Clearaudio Nano Headphone Phonostage is embedded within a solid CNC-machined aluminium block, which forms a resonance-free chassis. The latest sophisticated surface-mount technology is used in conjunction with precision electronic components, such as Burr-Brown (Texas Instruments) integrated circuits, and extremely short signal paths leading the Clearaudio Nano Headphone Phonostage to produce pure, hum and noise-free music reproduction. The fully dual-mono design features separate left and right switches for input loading, gain control and choice of MM or MC sensitivity, allowing the Clearaudio Nano Headphone Phonostage to extract the best results from virtually any cartridge.

FEATURES

  • Low signal to noise ratio of up to 84 decibels
  • The input imedance is set using plug-in links, so there is no loss of quality when you difference MM/MC cartridges
  • Surface-mount technology is used leading to produce pure, hum and noise-free music reproduction

Specifications

MODE: MM / MC switchable by jumpers (at bottom) 
Subsonic filter switchable by jumpers (at bottom)
AMPLIFICATION: 34dB (MM mode)
54dB (MC mode)
INPUT LOAD: 47 kΩ/ 220pF / MM mode
User MC mode
RIAA ACCURACY: ± 0.4dB @ 20Hz - 50kHz
THD: < 0.04%
SIGNAL TO NOISE RATIO: 81dB (A) (MM mode)
70dB (A) (MC mode)
HEADROOM: 18dB / MC
MAX. OUTPUT VOLTAGE: 10V eff (1 kHz)
RIAA: Nach RIAA (Zeitkonst.: 75µs / 318µs / 3180µs)
CHANNEL SEPERATION: > 80dB @ 1kHz
OUTPUT IMPEDANCE: 75Ω
INPUTS: unbalanced (RCA)
OUTPUTS: unbalanced (RCA)
optional headphone output (Jack: 3.5mm)
POWER CONSUMPTION: Max. consumption: 2.3 Watt
In operation: 2.3 Watt
Standby mode: < 0.3 Watt
Off mode: 0.0 Watt
POWER SUPPLY: ±18V DC / 300mA
(external power supply)
TOTAL WEIGHT: Approx. 500g (Preamp and power supply)
DIMENSIONS (W/D/H): Approx. 3.35 × 4.17 × 0.98 inches
DIMENSIONS (W/D/H): Approx. 85 × 106 × 25mm

No reviews left yet
Write A Review

Delivery Information

Delivery is free for all orders over £250.

'In Stock' items ordered before 1pm will be dispatched the same day.

We use DPD Local 'Next Day Service' for most UK deliveries. Orders sent via 'DPD Local - Next Day Service' will be fully tracked with a 1-hour delivery timeslot on the day of delivery. Standard delivery is Monday to Friday.

Saturday delivery can be selected at checkout for £19.95.

Small items and LP's may be sent using Royal Mail.

Large/heavy items may be sent using TNT Express.

For all other countries please visit the 'Delivery Information' link in the footer.

Occasionally, due to stock demand, we can sell out. If this occurs when you make a purchase, we will inform you quickly. Most out of stock items are available for dispatch within 3 working days. If your purchase is urgent, please contact us to check availability.

Customer Reviews

Clearaudio Nano Phono V2

Available

Product Code CLEARAUDIO-NANOV2-B

Price Promise: If you find an identical item cheaper from one of our online competitors, tell us and not only will we match the price, we'll beat it by 10% of the difference! Terms and conditions apply, see more information about our price promise.

Customer Reviews

Rated 5-Star
on reviews.co.uk

Free UK Delivery
on orders over £250

Generous Part Exchange
contact us for a quote

Satisfaction Guarantee
up to 90 days exchange
VAT Number: 945 0045 42 Registered company: SC351858
© Copyright 2025   Audio Emotion All rights reserved


© Audio Emotion Ltd 2025
VAT Number: 945 0045 42 Registered company: SC351858
We are authorised and regulated by the Financial Conduct Authority. Firm Reference Number: 840506

*PayPal Credit and PayPal Pay in 3 are trading names of PayPal UK Ltd, 5 Fleet Place, London, United Kingdom, EC4M 7RD. Terms and conditions apply. Credit subject to status, UK residents only, Audio Emotion Ltd acts as a broker and offers finance from PayPal Credit. PayPal Pay in 3 is not regulated by the Financial Conduct Authority. Pay in 3 eligibility is subject to status and approval. 18+. UK residents only. Pay in 3 is a form of credit. Check if affordable and how you will repay. May make other borrowing more difficult or expensive. See product terms for more details.