Dali Spektor Vokal takes centre stage of your home cinema, a perfect tonal match for other Spektor and Dali speakers, delivering clarity and depth to any movie.
Perfectly Matched
If you are looking for an affordable centre channel, the Spektor Vokal will meet your expectations. It is serving up a detailed, dynamic and powerful audio reproduction and is a perfect match with any of the three models in the Spektor series: Spektor 1, Spektor 2 and Spektor 6 speakers, no matter whether you plan to use it in a 5.1 or 7.1 surround setup, or even as a front channel only 3.1 setup.
Like all Dali loudspeakers, the Spektor Vokal has been designed in accordance with our fundamental acoustic and electro-acoustic principles, and a strong belief that clarity and an authentic, honest sound reproduction will get you even closer to the full impact of a live concert experience.
Well Integrated Sound
Dali makes it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the Spektor Vokal have been selected to achieve a wide dispersion pattern.
You will experience a well-integrated sound, even when listening significantly off-axis. And, as you are often not seated directly in front of the loudspeaker when listening to music, this is important.
Off-Axis Distribution
Optimising the audio signal for off-axis distribution results in the signal reaching your ear directly and the signal reflected off the room surfaces, to have a coherent balance. This means a consistent high sound quality across a much wider listening area. At the same time, it offers greater freedom and flexibility in positioning the loudspeakers.
An added benefit is hugely reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all Dali speakers are not designed for toeing-in.
Ultra Lightweight Dome
The Spektor Vokal tweeter is able to render high frequencies with high accuracy. This means very short excursions, but at high speed, - or rather with high acceleration. In other words, it features a low moving mass and a strong motor. The tweeter used in the Spektor Vokal is based on an ultra-light weight weaved fabric. Compared to most soft dome tweeters in the market, the Dali dome material is less than half the weight; 0.056 mg per mm2.
High Frequencies
The beauty of the soft dome tweeter is its impressive ability to play even the lowest parts of the high-frequency range without any break-ups. This is crucial when handling the all-important hand-over from the woofer to the tweeter. Not having to push either the woofer or tweeter beyond what they do best results in a seamless transition and preservation of every detail in the mid-range frequencies.
Wood Fibre Woofer
The Spektor Vokal sound signature is built around two 4,5 woofers, which are developed specifically for this speaker. Even small details like the angle of the wood fibre cone and the size of the dust cap is optimised for the best possible integration, dispersion and performance in the Spektor Vokal.
The wood fibre cones are a Dali trademark, as well as a proven Dali technology. The Spektor Vokal cone membranes are crafted from a mix of fine-grained paper and wood fibre pulp. This makes the cones very ridged, very light weight and the unevenness in the structure of the membrane helps minimise unwanted surface resonances.
Micro-Detail Reproduction
Combining the well-behaving wood fibre cone with the low-loss rubber surround and spider suspension results in the reproduction of even the smallest micro-detail in the signal unfiltered and with high accuracy.
The structure of the chassis was designed for optimal strength and airflow. Keeping the woofer structure strong eliminates internal vibrations and the optimised airflow around the cone area keeps movements unhindered, resulting in the ability to transform as much of the energy from the amplifier into movement.
Realistic Audio
The primary function of any loudspeaker is to convert the electrical signal from the amplifier into a realistic audio experience in the listening room. Any distortion or coloration of the original signal by drivers or enclosures is by definition a degradation of the sound. Clarity in an audio signal is obtained by low loss of information in combination with creating a smooth and seamless reproduction in both the time and frequency domain.
By using only Dali designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This enables us to design an exact crossover out of quality components which ensures that the signal loss is close to zero.
Ultimate Transparency
Another fundamental is the lowering of mechanical distortion. This to make sure that the connected amplifier will not be exposed to a larger than necessary challenge, causing loss of detail in the signal even before it has the chance to reach the loudspeaker.
Through very low mechanical loss, the most fragile sound details, even at very low listening levels, are preserved. This is the only way to obtain the sensation of ultimate transparency and liveliness from reproduced loudspeaker sound.
