Gato Audio DIA-250S Integrated Amplifier with DAC

Home > Amplification > Integrated Amplifiers > Gato Audio
Stock code: GATODIA250SINT


    For more information on any of our products please call us:


    01333 425999


    Our Price: £3,690.00
    • Product Info
    • Stock Enquiry
    • Part Exchange
    • Reviews (0)

    Product Information

    OWN A NON-S MODEL?
    WANT TO UPGRADE TO THE FULL 'S' SPEC?

    DIA-250 > DIA-250S
    DIA-400 > DIA-400S
    PRD-3 > PRD-3S


    S is for "Super" and "Streaming"

    This brand new amplifier may look like the standard DIA-250 amplifier we introduced three years ago, but in fact we put more than a years work into improve every part of the DIA-250s already fantastic award winning performance. We changed and improved the electrical circuits and layouts in more than twenty ways, the most significant being:

    • Optimized mains filter
    • Improved general and local power supplies
    • New input stage
    • Improved output stage
    • New analogue stages in the D/A converter
    • Improved digital signal routing
    • Updated firmware
    • Improved connectors
    • Incorporates the high resolution aptX Bluetooth module for all your streaming requirements

    More details, better micro dynamics and more "air" around the performing musicians. Everything is served with naturalness and a musicality normally reserved big expensive class A/B amplifiers - the result is stunning!

    Class-D with smooth analogue music
    The DIA-250s amplifier offers a state of the art Class-D output stage with dedicated and optimized switch mode power supplies. The multiple stage power amplifier is built around proven technology from International Rectifier, optimized with a precision high frequency oscillator and PWM modulator. A pair of precision switching MOS-FET transistors, with super low on-resistance ensures the high frequency switching is done perfectly and with as little loss as possible. The output filters are made from quality PP capacitors and low DCR coils, converting the high power PWM signals back into detailed and smooth analogue music.

    More than just an Amp
    The built-in D/A converter offers real high end performance, enabled by the use of a dedicated power supply, a balanced-drive Burr-Brown PCM1794 D/A converter, an optimized high bandwidth I/V converter, and an analogue stage with low-Q, low pass filters. All digital inputs are upsampled to 24bit/192kHz. This D/A converter will upgrade any digital source - such as wired or wireless streaming from your computer or CD drive - to a high end level of detail and musical performance.

    Versatility and Connectivity
    We had our eye on versatility and connectivity when designing this amplifier. The DIA-250s offers not only a high resolution aptX Bluetooth streaming module,  but also a wide range of digital and analogue inputs, but also line outputs, a trigger signal for external power amplifiers, and a configurable home theater input. The HT input can turn the amplifier into a fixed level power amplifier for use in a surround setup, without compromising the sonic performance.

    Features:

    • 2x 250W@8ohm / 2x 500W@4ohm
    • Class D output stage
    • Built in 24bit/192kHz D/A converter with upsampling
    • Coax, optical and asynchronous USB digital input up to 24bit/192kHz, optical up to 24bit/96kHz
    • aptX Bluetooth 4.0 receiver for all your streaming applications.
    • Accepts digital streaming directly from Apple iPad
    • Two unbalanced and one balanced inputs
    • Nonmagnetic enclosure
    • Direct function; enables use in home theater sytems
    • Designed, developed and build in Copenhagen, Denmark

    Technical data

    Technical stuff
    Output power 2x 250 W / 8 Ω - 2x 500 W / 4 Ω
    Frequency response 20 Hz-20 kHz - 0.5 dB, and 2 Hz-70 kHz - 3 dB
    Total Harmonic Distortion < 0,01% at rated power
    Signal to noise ratio > 110 dB
    Line out maximum level 13V balanced, 6,5V unbalanced
    Total Harmonic Distortion < 0,001% pre out
    Input impedance 20 kΩ RCA or 40 kΩ Balanced
    Line output impedance 75 Ω
    Voltage gain 26 dB (+10 db headroom)
    Recommended speaker load 4 -16 Ω
    Connectors
    Balanced analogue inputs 1 pair gold plated XLR Neutrik
    Unbalanced analogue inputs 2 pairs of gold plated RCA Stereo
    Digital inputs 1 pc USB type B, 1 pc Toslink, 1 pc RCA
    Balanced analogue outputs 1 pair gold plated XLR Neutrik
    Unbalanced analogue outputs 1 pair of gold plated RCA Stereo
    Speaker output 2 pairs of gold plated safety banana
    Trigger, 12 V 1 pc mini jack
    Size & Power
    Power Requirements 115 VAC/230 VAC, 50 Hz/60 Hz, 1000W max
    Power consumption stdb/idle/max < 1W/23W/1000W
    Dimensions (WxHxD) 325 x 105 x 420 mm / 12.8 x 4.1 x 16.5"
    Weight 10 kg / 22 lb

    Stock Enquiry

    Occasionally, due to stock demand, we can sell out. If this occurs when you make a purchase, we will inform you quickly. Most out of stock items are available for dispatch within 3 working days. If your purchase is urgent, use this form for a priority price and stock availability check.

    All pre-owned items are in stock and available for next day delivery if order placed before 1pm.

    Enquiries will be responded to within 1 hour during office hours.

     

    EMAIL US

    Call us

    • 01333 425999

    Part Exchange

    If you would like a quote please fill in the form below with as much detail as possible and we'll get back to you with a price.

    Customer Reviews

    Write an online review and share your thoughts with other shoppers!

    Be the first to review this product

    Related Products
    Customer Reviews