MS HD Power Cable for Higher Current Equipment
This is a 2.5mm² fully shielded low impedance power cable using MS HD Power 78K cryogenic treatment and Rhodium plating on plugs. This cable is recommended for power supplies and integrated amplifiers.
Fitted with a high quality 13A UK 3 pin plug and IEC plug has been designed to be used with audio equipment power cables for the best power transmission with no compromises. All the electrical parts (polished pins and all internal parts) are made from premium quality copper, the Fuse Clips are made of high spring rate Phosphor Bronze all Rhodium Plated and supplied fitted with a high quality 13A silver plated fuse.
People would think of -196 degree Celsius when talking about cryogenic treatment. Celsius is normally used by observatory when describing weather temperature. Scientists use Kelvin (K) to represent temperature unit. Zero Kelvin means absolute zero of temperature, or -273 degree Celsius. Hence, -196 degree Celsius should be read as 77K, much simple and professional.
Why does MS HD POWER name their cryogenic technology as 78K rather than 77K? It is because their treatment technology is not using 77K temperature, they use a very special technology namely “78K Impassion Treatment Technology” to emphasise uniqueness.
Normal cryogenic treatment uses liquid nitrogen as treatment media. Cryogenic treatment can be divided into two types of method: wet type and dry type. Wet type makes the metal parts inside liquid phase nitrogen while wet type makes the metal parts inside vapour phase nitrogen. Liquid phase nitrogen treats metal parts rapidly but temperature control cannot be easily achieved. Vapour phase nitrogen treats metal parts slowly but temperature control can easily be controlled. Rapid decrease of temperature makes metal parts to have residual stress which affects the electric conductivity of metal parts. Slow and consistent decrease of temperature avoids residual stress in metal parts, hence increases electric conductivity of metal parts.
Deep cryogenic treatment does affect the arrangement of crystal structure inside metal parts in a rather small scale. That’s why MS HD POWER did not cryogenically treat their metal parts in the past time. In 2014, MS HD POWER put up a research on metal part treatment in associate with a deep cryogenic treatment expert in UK. They successfully achieved a unique method to increase electric conductivity of metal parts, “78K Impassion Treatment Technology”.
FEATURES
78K cryogenic treatment enhances superb quality and performance.
High current, low loss and fully shielded power cable best suit for distribution bars and power-hungry Hi-Fi equipment.
Unique 2.5mm² / 6N OFC / pure 925 silver plated / EMI & RFI shielded / 3G / multi-stranded cable.
MS-328 RK 78K rhodium plated UK Plug with 78K 13A silver fuse ( complies with BS-1363 safety standards ).
MS-9315 RK 78K rhodium plated IEC connector ( complies with EC-60320 safety standards ).
SPECIFICATIONS
Length: 2.0 Meters
Power Connector: MS-328 RK with 13A Fuse.
IEC Connector: MS-9315 RK type C-15
