MSB Technology Dynamic Headphone Amplifier | Preowned | Audio Emotion

View more images

Product Description

As new condition.
Original box and packing.
Original factory manual.
Finish : Matte Black.
Brand New in 2023.

An experience like no other, and the true magic of the ultra HiFi sound brought to your dynamic headphones.......

Dynamically driven.
Designed to be driven by any high quality Pre Amplifier, and designed to achieve the full untapped potential from your dynamic headphones, the Reference Dynamic Headphone Amp is a fully balanced amplifier.

Boasting 139dB of dynamic range, the amp works in tandem with the Reference and Select DAC, allowing the music to come to life in vibrant and unforgettable new ways.

CNC billet chassis.
Starting with a 65lb plate of raw aluminium, material is machined in MSB's own in-house CNC shop.

After more than four hours of machining, 60% of the aluminium is removed, resulting in a significantly lighter, more contoured product with the best anodized finishes on the market.

4-Pin XLR
Each amplifier is equipped with three 4-pin XLR outputs, designed for a shared listening experience.

Fully equipped.
A rear-facing headphone jack allows for a cleaner system aesthetic there aren't any dangling cables interfering with a cleanly assembled system.

The noise floor is reduced with an isolated transformer and grounding scheme. 12 Volt triggers allow remote control over the system power.

Analogue bypass.
If you're sharing the headphones with a two-channel system, use MSB's internal bypass we've installed directly into the amp. Simply turn off the unit for the signal to be sent to your other system.

Technical Specifications:

The Dynamic Headphone Amplifier
Supported Formats	Analogue Only
XLR Analog Inputs	Optimized for 75 or 150 Balanced Source
XLR Analog Outputs	Direct connection to input when enabled or unit powered off. When listening to headphones, output is muted with 75 output impedance
Headphone Output Impedance	0.45
Dynamic Range 20Hz-20kHz (Max Power at 45)	>139dB >141dBA
Frequency Response	5Hz-20kHz ±0.016dB
Common Mode Rejection Ratio	> 95dB CMRR @ 60Hz > 95dB CMRR @ 1kHz > 80dB CMRR @ 20kHz
Crosstalk	<-130dB Crosstalk @ 1kHz <-110dB Crosstalk @ 20kHz
SMPTE IMD 0dBu	0.0019% @ 45
% THD+N 1kHz 0dBu	0.00065% @ 45
Max Power @ 1% THD+N	16 @ 4.25Vrms (1.12W)
	32 @ 8.6Vrms (2.3W)
	45 @ 15.5Vrms (5.3W)
	150 @ 15.6Vrms (1.62W)
Noise Floor (150 Input Impedance)	0.00168mVrms 20Hz-20kHz
Headphone Output Connectors	1x Rear 4 Pin XLR 2x Front 4 Pin XLR
Display	Power LED
Controls	IR Remote (Configurable) Power Button (Configurable) 2x MSB 12V Trigger
Power Consumption	64 Watts Less than 2W standby 230v or 120v compatible - Supplied with external PSU for 120v use. also
Topology
Input/Gain Stage	- Class-A - Double balanced - Impedance matched - DC coupled - Fully discrete
Output Stage	- Class-A - Balanced - Current gain only
Chassis Dimensions
Width:	17.5 in (444 mm)
Depth:	17.5 in (444 mm)
Chassis Height (Without Feet):	2.2 in (56 mm)
Stack height:	2.85 in (92 mm)
Weight:	34 lbs (15.5 kg)
Product Feet:	M6X1 Thread
Shipping Dimensions
Width:	23 in (585 mm)
Depth:	23 in (585 mm)
Height:	7 in (178 mm)
Weight:	42 lbs (19 kg)

Specifications

Brand

MSB Technology

Condition

Used

Product Code

MSB-DYNAM-P

Weight

13kg

Description

As new condition.
Original box and packing.
Original factory manual.
Finish : Matte Black.
Brand New in 2023.