The Restek MAMP provides the matching power amplifier of the M-series its preamplifier MPRE + to the side. MPRE + and MAMP are not only visually, but also technically optimally co-ordinated. Together, MAMP revealed the reinforcing core of a high-quality hi-fi chain trimmed on perfect musicality of the compact preamp MPRE + and the two equally compact Mono power amplifier.
The MAMP has split a mirror-symmetric Mono structure, on two compact housing. This structure leads to excellent values of channel separation, channel opportunities and crosstalk.
A moderate current and voltage feedback enables an optimal distribution of clanking and hence a 'warm' analog sound with deep enough bass response.
At the same time, the MAMP offers maximum operating safety. A servo circuit adjusts the offset voltage at the output on a possible small amount. The internal electronics are monitored with additional components on overtemperature, overcurrent, and positive or negative offset. In the event of a fault, the speaker on a high current relay of the electronics are separated.
All parts of the electronics of the MAMP are DC-Coupled, it is possible to transmit also the lowest frequencies without errors. This means it can transmit without distortion and have phase-fixed in the lower frequency range. There are no capacitors or capacitors which could lead to a distortion in the signal path.
||70 Watts into 4 Ohms; 50 Watts into 8 Ohms
||85 W into 4 Ohms; 56 W into 8 Ohms
||1 Hz... 110 kHz (-3 dB)
|Total harmonic distortion
||> 200 (8 ohm, 1 kHz)
||2 V rms
||140 x 64 x 330 mm
||approx. 2.8 kg each
||LED red, green or blue
|Versions of the front
||Acrylic mirror polished, black, champagne, or silvery matte brushed aluminium, chrome plated brass, as well as special designs on request